Xmas Sale US/UK/EU Ship No Tax 2023 FoxFlash Master Version Super Strong ECU TCU Clone and Chip Tuning Tool Support Checksum with Auto Checksum WinOLS 4.70 Damos2020 Get Free Gifts

Support Five Modes and Full System
 
1: OBD mode：(read the data from Diagnostic port, you need remove the ecu or tcu from car or open the ecu box, just read everything from car, we also support obd reading, we supply original file from our server, you can read it via obd reading. )
2: BENCH mode: we also call it service mode,  you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can clone tcu and chiptuning with this mode.
3: Jtag mode: open the ecu, and wire it or use ours adapter to connect ecu ways,some of denso ecu always need use this mode for reading and writing .
4: Boot mode: open the ecu and always can backup everything, read the flash and eeprom, you can save some ecu cause your obd write failed, or some others reason cause the ecu dead.
5: Full system: you can read and write by pinout for most of ecu and tcu.
6: BDM mode: some of the ecu need read and write in bdm mode, open the ecu and use ours adapter to connect it.






Support Multi-language

foxFlash supports multi-language: Italiano, English, Deutsch, Francais, Espanol, Polish, Portugues, Czech, Romana, Turkish.




Supported Winols damaos supply

As we all know,winols damaos and A2L is very expensive, with a foxFlash, you will have this function for free, so you can get it for chitpuning , dtc off, and so on


 
Supported Control Units
We believe a control units list can be considered as a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.
 
Please note that foxFlash can help you select the right protocol with its auto-detection feature when identifying on most control units.

Support Vehicle Types: 
 
CAR
TRUCK
MOTORBIKE
TRACTOR
BOAT
Additional TCU package available for Automatic Transmissions.







 
Product Functions:

ECU clone
TCU clone
Chiptuning
Stage1-stage4
Vmax off
Adblue and SCR off
DPF  OFF
Flaps OFF
popbangs
gearbox data to adjust LC
sport display
immo off
dpf off
dtc off
GPF/OPF Removal
DPF Removal
EGR Removal
DTC Removal
ADBlue Removal
HOT Start Fix
IMMO Removal
Readiness Calibration
Flaps / Swirl Removal
TVA Removal
Sport Displays Calibration
Cold Start Noise Reduction
Kickdown Deactivation
StartStop Disable
MAF Removal
Speed Limiter Removal
Torque Monitoring Disable
Burbles Activation
Popcorn Activation
EVAP Removal
Exhaust Flap Removal
SAP Removal
AGS Removal
BMS/BPCM
Lambda/O2 Removal
Launch Control
OBD Reading Protection
Boost Sensor Calibration
LC, AL and NLS for MED9.1
Checksum Fix
vmax, swirl off
restoring ECU or TCU factory setting service
VIN fix (EEPROM support checksum , so you can easy change VIN then write back )

FoxFlash Update Information:


FoxFlash Software Update Log

Dec. 6th, 2023

foxFlash Dev team is working on following operations:

Bench Beta Vesion protocols
TRW EMS
EMS 2.2 2.3 2.4 VOLVO TRUCK / RENAULT TRUCK
ACM / ACM2.1 MCM2 / 2.1

On the following TCU GEARBOX reference:
FORD POWERSHIFT 6DCT
GM-OPEL 6T3x
GM-OPEL 6T4x
GM-OPEL 6T5x
VAG DQ200 GEN1/GEN2
VAG DQ250
VAG DL501
VAG VL381

Nov.  15th, 2023

foxFlash is now able to perform the following operations:

New Clone Function
MEDC17
FCA
HYUNDAI
JAGUAR
LAND ROVER
SUZUKI
TOYOTA

On the following ECU reference:
BENCH
Delco E38 E67 E84 E92
BOSCH MG1CA007 MD1CS069 EDC17C11
BOSCH 6L45 6L50 6L80 6L90

BOOT
Siemens Continental SIM2K-305
BOSCH EDC17C11

OBD
Delphi DCM7.24
Delco E38 E92 E83 E80 E39A
Phoenix L40
BOSCH MD1CS069

Nov. 2023
OBD unlock patch Chrysler GPEC2 & GPEC2A

foxFlash is now able to perform the following operations:
OBD unlock patch
On the following ECU references:
Continental GPEC2 & GPEC2A
Jeep 2.4 Tigershark 184 hp
Jeep 3.2 Pentastar V6 275 hp
Jeep / Lancia 3.6 Pentastar V6 285 hp
Dodge 3.6 Pentastar V6 292 hp
Chrysler / Dodge / Jeep 3.6 Pentastar V6 296 hp
Chrysler / Dodge 3.6 Pentastar V6 305 hp
Jeep 3.6 v6 284 hp
Dodge 3.6 v6 305 hp
Fiat / Lancia 3.6 V6 280 hp
Dodge 5.7 V8 369 hp
Dodge 5.7 V8 HEMI 370 hp
Dodge / Jeep 5.7i 360 hp
Dodge 5.7i 390 hp
Dodge 5.7i 400 hp
Jeep 5.7i cylinder desact. 365 hp
Dodge 5.7i V8 eTorque 395 hp
Dodge 5.7i V8 HEMI 365 hp
Dodge 5.7i V8 HEMI 379 hp
Dodge 5.7i V8 HEMI 388 hp
Dodge / Jeep 6.1 SRT8 425 hp
Jeep 6.2 Hemi V8 707 hp
Dodge 6.2 V8 Hellcat 717 hp
Dodge 6.2 V8 SUPERCHARGED (TRX) 710 hp
Dodge 6.4 V8 410 hp
Chrysler / Dodge / Jeep 6.4 V8 SRT8 477 hp
Dodge 6.4 V8 SRT8 482 hp
Dodge 6.4 V8 Apache 492 hp

Method:
use BOOT TOOLS BOX
1: Read out the INTFLASH and EPROM
2: zip the file and send to us
3: we send back the patched file
4: user write back the Intflash
5:OBD then unlocked (some hptuner can direct tune car with this function).

Sept. 25th, 2023

Special customized version foxFlash Manager 1.3.6 verison.

through which we will

1: Improve all VR databases.

2: Personal equipment customization.

3: Customize your brand tuning logo into the tool software.

4: Special personal beta version customization and testing.

5: Private tool VR database, exclusive VR model database.

6:Special personal VR data needs to be opened on the official website and contact us through the online chat tool to assist you in updating the individual VR file database.

Update method:

Open foxFlash Manager software and it will automatically push the update. During this period, keep the USB connection of the device until the download is completed and reinstalled, you will see a new function.

Small update for checksum fix

September 14, 2023

Update checksum for mcu TC1766 TC1793 TC1797 TC1724F TC1767

foxFlash is now able to perform the following operations:
software caculate checksum
On the following ECU reference:
 Audi Bosch MED17.5 TC1766 
Audi Bosch MED17.5.5 TC1766
Audi Bosch MED17.5.20 TC1766 
Audi Temic VL381F TC1766
BMW Bosch EDC17C76 TC1793
Honda Bosch EDC17CP50 TC1797 
Hyundai Bosch ME17.9.21.1 TC1724F 
Jaguar Bosch MED17.9.7 TC1797 
Kia Bosch ME17.9.21.1 TC1724F 
Land Rover Bosch MED17.9.7 TC1797 
Mercedes Bosch EDC17CP01 TC1796 
Mercedes Bosch MED17.7.7 TC1793 
Mercedes Bosch MED17.7.7 TC1797 
Renault Bosch EDC17CP58 TC1767 
Seat Bosch MED17.5 TC1766
Seat Bosch MED17.5.5 TC1766 
Seat Bosch MED17.5.20 TC1766
Skoda Bosch MED17.5 TC1766 
Skoda Bosch MED17.5 TC1766
Skoda Bosch MED17.5.5 TC1766
Skoda Bosch MED17.5.20 TC1766 
Toyota Bosch EDC17C60 TC1793
Volkswagen (VW) Bosch ME17.5.6 TC1766 
Volkswagen (VW) Bosch MED17.5 TC1766 
Volkswagen (VW) Bosch MED17.5.5 TC1766
Volkswagen (VW) Bosch MED17.5.20 TC1766 
 
Update method: Click the download button in foxFlash manager till all file donwload complete

September 06, 2023
BMW MINI BENCH BOOT READ&WRITE

BMW INSTALL Bosch MEVD17.2.7 Bench read/write
foxFlash is now able to perform the following operations:
Bench Read
Bench Write
Boot    Read
Boot    Write
On the following ECU reference:
Bosch MEVD17.2.7
BMW        Bosch MEVD17.2.7     BENCH BOOT 
Citroen     Bosch MEVD17.2.7  BENCH BOOT 
Mini          Bosch MEVD17.2.7       BENCH BOOT 
Peugeot   Bosch MEVD17.2.7  BENCH BOOT 

Update method: Click the download button in foxFlash manager till all file donwload complete

May 23, 2023 update
Bench/Boot protocol for Isuzu EDC17C83.

May can't get any better as we release a new exclusive protocol today! In this update, you'll find the BENCH protocol for Isuzu EDC17C83.
Supported Control Units & Vehicles
ECU:
Bosch EDC17C83 TC1793

Supported Vehicles:

Isuzu Dmax 2017-2022 1.9D 164cv
Isuzu Dmax Rodeo 2017-2022 1.9D 164cv
Isuzu M21 2017-2022 1.9D 123cv

BENCH  read is real.

R/W time:   ~6 minutes at first programming, then ~ 30s.

ATTENTION: Some of the latest vehicles might have a secure gateway. 

Update method: Run the foxFlash Manager software, and click the download button till all is done.
 
January 27, 2023
 
FoxFlash is now able to perform the Toyota Denso Gen1 (76F00xx) OBD read/write
FoxFlash is now able to perform the following operations:

• OBD Read
• OBD Write

On the following ECU reference:
Denso Gen1 (76F00xx)

• Hino 4.0 VVT-i 147ch
• Lexus/Toyota 2.5 205ch
• Lexus 200H (1.8 E-CVT) 99ch
• Lexus 220d 177ch
• Lexus 250 (GSE20) 200ch
• Lexus 300 (3.0 V6) 204ch
• Lexus 330 (3.3 V6) 230ch
• Lexus 350 (3.5i V6) 275/300ch
• Lexus 400h (3.3i V6) 272ch
• Lexus 430 290ch
• Lexus 450h (3.5i V6) 292/299ch
• Lexus 460h (4.6 V8) 247ch
• Lexus 600h (5.0 V8) 394ch
• Toyota 1.0 (1KR-DE) 64ch
• Toyota 1.3 VVT-i 87/100ch
• Toyota 1.6 VVT-i 132ch
• Toyota 1.8 VVT-i HSD/TS 99/129/133ch
• Toyota 2.0 (1AZFE) 145ch
• Toyota 2.0 D4-D 116/126ch
• Toyota 2.0 DOHC 16v 156ch
• Toyota 2.0i 150ch
• Toyota 2.2 D4-D 136/150/177ch
• Toyota 2.4 (2AZFE) 160ch
• Toyota 2.5 205ch
• Toyota 2.5 D4-D 101/125/144/150ch
• Toyota 2.7i 161/188ch
• Toyota 3.0 D4-D 172ch
• Toyota 3.5 (2GRFE) 270ch
• Toyota 3.5i V6 266ch
• Toyota 4.0 V6 239/249/260/273ch
• Toyota 4.3 VVT-i 300ch
• Toyota 4.5 D4-D 272ch
• Toyota 4.5 V8 D4-D 198ch
• Toyota 4.6i VVT-i D-45 314ch
• Toyota 4.7 V8 280/288ch
• Toyota 5.0 VVT-i 295ch
• Toyota 5.7i VVT-i D-45 286ch
• Lexus GS 300
• Lexus GS 350
• Lexus IS-F
• Toyota Prius
• Toyota RAV 4
• Toyota Sequoia
• Toyota Tacoma
• Toyota Tundra
• Toyota Verso
• Toyota Auris
• Toyota Auris
• Toyota Avensis
• Toyota Camry
• Toyota Corolla (Verso)
• Toyota Crown
• Toyota Dyna
• Toyota Estima
• Toyota FJ Cruiser
• Toyota Fortuner
• Toyota Hilux
• Toyota Land Cruiser
• Toyota Mark X
• Toyota Optimo

ECU UPDATE New Protocols for Bentley Skoda (BOSCH )

Today we added multiple protocols for Bentley, Skoda, Honda, Volvo, etc. More info on supported ECUs and cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BENCH /BOOT/OBD
BOSCH
BAIC Bosch ME17.8.8 TC1728: Senova x25 1.5 VTI (2016), Senova X35 1.5 VTI (2016) , BJ20 1.5 VTI (2016)(BOOT)
Honda Bosch ME17.9.55 TC1724: City/Jazz/BRIO/FIT 1.2L i-VTEC (2014)(BOOT)
Mahindra Bosch EDC17C53 TC1767: XUV500 2.2 CRD (2014)(BENCH BOOT)
Bentley Bosch MG1CS163 TC298: Continental GT W12 6.0 (2018)(BENCH)
Volvo Bosch EDC16C34 MPC562: V70/S80 1.6D (2010)(OBD BENCH JTAG)
Skoda Bosch MED17.1.27: Fabia 1.0 TSI (2017)(OBD BENCH BOOT)
Bentley Bosch MED17.1.62: Bentayga W12 6.0 (2016)(BENCH BOOT)

BMW MSV90 Protocols BOOT Mode

This time it is for BMW cars with Siemens MSV90 TC1796 ECU. More info on supported cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BOOT
SIEMENS
MSV90 TC1796
CARS:
BMW 5 Series F10 – 530i N53B30A/N52B30B
BMW 5 Series F11 – 530i N53B30A/N52B30B
BMW 7 Series F01 – 730Li N52B30A/N52B30B
BMW 7 Series F02 – 730Li N52B30A/N52B30B
BMW X3 Series F25 – 28i xDrive N52B30A/N52B30B

Delphi DCM6.2AP DCM6.2A DCM6.2C DCM6.2V 

FoxFlash is now able to perform the following operations:

DCM6.2A/C/V
OBD Read
OBD Write
JTAG_BOOT

DCM6.2APJTAG_BOOTOn the following ECU reference:

Hyundai
Audi
Citroen
Fiat
Kia
MAN
Peugeot
VW
Toyota
Ssangyong

January 26, 2023

FoxFlash Can Support AUDI VW Group TCU DQ250C/E/F OBD virtual read/write-BENCH Read&Write
FoxFlash is now able to perform the following operations:
OBD Virtual Read
OBD Write
BENCH Read
BENCH Write
On the following TCUs:
Temic DQ250C
Temic DQ250E
Temic DQ250F
Vehicles concerned:
AUDI/SKODA/VAG 2.0 TSI/TFSI
AUDI/SKODA/VAG 2.0 TDI CR

January 20, 2023
 
– BENCH MODE BY PROCESSOR INFINEON TRICORE TC1782
With this update you will be able to fully read and write the following ECUs directly
From pinout without having to open them:
– VAG GROUP VW-AUDI-SEAT-SKODA: MED17.5.21, MED17.5.25
– FORD: MED17.0.7
– NISSAN: EDC17 C84
– RENAULT: ME17.9.20, EDC17 C84
– TOYOTA: MED17.9.52, EDC17 C47

January 16, 2023

EXTRACT PASSWORD FROM FILE 

– NEW DRIVERS TO EXTRACT PASSWORDS FROM FILES

New utilities useful for extracting the password by loading a Tricore processor file.
As of now, the software will also save the tricore password locally for each Tricore processor reading.

FULL SYSTEM FOR TCU TEMIC 6T50 OPEL, CHEVROLET

– Complete reading and writing of Micro,
– Complete reading and writing of EEPROM,
– Cloning
– RIVERGIN function

FoxFlash vs KT200

1. Foxflash use faster server. No VPN needed. Supports WiFi hotspot. 
2. FoxFlash gets 2-year warranty and KT200 only 1 year
3. Software has the same function. Foxfalsh develops own firmware, use own component selection, with better materials. improve on problems, more stable.

Support Vehicle Types: 
 
AUTO
CAMION
TRATTORI
MOTO
MARINE
BIKE
CAMBI AUTOMATICI

Multiple connection possibilities:


EXAMPLES OF CONNECTION IN FULL SYSTEM BOSCH / DELCO / DELPHI / DENSO / MARELLI / SIEMENS / CONTINENTAL / TEMIC


BENCH CONNECTION

BDM CONNECTION

JTAG CONNECTION

BOOT MODE CONNECTION

BENCH CONNECTION WITH AUTOMATIC GEARBOX

FoxFlash ECU Programmer Package List:
Hardware:
1pc x Master machine 
1pc x Fox bench box
1pc x USB cable 
1pc x Power adapter
1pc x Fox box store over 10 adpaters 
1pc x Jtag and bdm cables
1pc x Pen 
1pc x Notebook
1pc x Suitcase
1pc x Function cable for boot, bench, kline links .
1pc x Truck OBD cable
1pc x Car OBD cable
1pc x Paper box 
1pc x Install guide 
 
Software:
1pc x  Main software
1pc x  Technical Support
1pc x  Login account for software and tools
1pc x  PDF pacakges for connecting ecu and tcu
1pc x Join facebook group for support 
1pc x Online chat support for use
 
Extra pacakge according to users request after the user get the tool.
1pc x Tuner account
1pc x Helpdesk
1pc x WinOLS damaos, A2L 

NOTE: 
Send your register email to info@dfb-technology.com to activate your account. Then download free damos files.











We strongly recommend users to use online mode. The reasons are as follows:
 
1: We can help you check if your file is correct online.
2: The autochecksum can work online check too.
3: It is safer.
4: The online mode can check if your modifying is correct. If not, we can help to solve the problem.
5: The online mode can auto VR read and write from our server, which mean you can get the original file, and we can help you recover or save your broken ecu.
 
BTW, if you want to go out or work outside with our tool, just use your phone to turn on a hotpot, ours tool can work with hotpot. You will NOT need any VPN, for we have a wordwide server. No matter where you are, you can connect us.
 
The online work is easier and safer. Please do NOT let your ecu become a brick without using the online mode.

Foxflash FAQ:

Question: foxflash read/write flash EDC17C46 ecu?
Answer: Yes

Question: if Fox flash read Toyota denso 2nd generation, Or i can whrite with fox
Answer: Yes, you can.

Question: Has anyone read and written this ecu? Mazda cx5 2.2 skyactive 2016 year
Answer: yes on bench ok.

Question: Hi FoxFlash can do clone PCR2.1
Answer: Yes, it can.

Question: Can read dcu17pc43 ford transit adblue module?
Answer: Yes, it can.

Question: Does foxflash doing checksum on DCM3.7 ?
Answer: Yes, it does.

Question: if you could tell me if the fox Flash will remove security on the Dodge 2015 and up computers if so can I tune it with HP tuners afterwards
Answer: Yes, it supports unlock function.

Question: has anyone tried reading and writing a BMW MSD87 with Fox Flash?
Answer: OBD MSD81 100% so MSD87 should be fine too.

Question: foxflash work on mevd.17.4.4 of psa please?
Answer: Yes, it works.

Question: Hi, please can foxflash R/W audi rs3 2019 MED17.1.62? Thanks
Answer: Yes, you can.