13th Anni Sale V2024.3 SSD SUPER MB PRO M6+ Full Version DoIP Benz Diagnostic Scanner Support Wireless for Cars Trucks Support new Model W223 C206 213 167

Product Description

V2024.3 SSD SUPER MB PRO M6+ Full Version DoIP Benz Diagnostic Scanner Supports BMW Aicoder, E-sys

Top Reasons to get SUPER MB PRO M6+:

1. 100% compatible with the original Mercedes-Benz software.
2. The front label of the M6+ uses a design with trademark rights and art copyrights to improve product recognition.
3. The communication interface between the M6+ and the computer is a USB3.0 interface, which improves the compatibility of the product with computers and tablets. (Compatible with both old and new computers and tablets, no need to choose old-fashioned computers and tablets with network ports.)
4. M6+ supports remote C-side operation. The client does not need to install special diagnostic testing software. Just connect the M6+ to a local computer that can access the Internet, and we can remotely provide customers with paid diagnosis and detection services of vehicle failure. Customers can also set up a local remote diagnostic test in the local area network. The above ways greatly improve the product flexibility.
5. M6+ supports BMW E-SYS, Aicoder, wired and wireless programming and coding of F and G series, and supports BMW modification, hidden functions activation.
6. M6+ supports BMW APP software, provides mobile phone English version of Bimmercode (coding hidden functions activation) Bimmerlink (diagnostics codes clearing) and other mobile phone software, supports MHD .Bimmergeeks .. XHP Flashtool. ODIS-e.XDelete.THOR-the M Flasher.PRO- Tool and other mobile apps.
7. M6+ supports vehicles with DOIP communication protocol, such as the new Volkswagen, Audi, Skoda, Bentley, Lambo, etc. A dedicated transition button is provided.
8. Support new models such as W223 c206 213 167
9. Years Support: 1991-2024 Benz cars including DOIP

Product Functions:
 
M6+ and M6 product function comparison chart
 

	M6 Product Functions	M6+ Product Functions
XENTRY	√	√
XENTRY Truck	√	√
DTS	√	√
VIDEO	√	√
MB DOIP	√	√
MB WIFI	√	√
PC USB	×	√
PC RJ45	√	×
BWM Aicoder	×	√
BWM E-SYS	×	√
BWM APP	×	√
Other DOIP	×	√

 
M6+ Connection Instructions
 
1. Connection between MB diagnostic software and hardware
 
(1)Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, ② is always on and beeps once, indicating the startup is finished.
(2)Wired connection: Connect the USB port ⑦ of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and the IP address of the network connection property will be changed to 169.254.255.*, Subnet mask: 255.255.0.0, Preferred DNS: 169.254.255.255, click “Advanced”, add multiple IP addresses as 172.29.127.*, 255.255.0.0. After the computer or tablet is connected to the network, ④ the indicator light will be on.


(3) Wireless connection: You cannot find the wireless network by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet, just connect it. ⑤ The green light of the wireless indicator is always on, the wired light is off, no setting is required, the password is 123456789.
(4) After opening the BEN software lock on the computer side, the original diagnostic test software can be used normally.
(5) For remote C-end operation, please consult us.
 
2, Connection between BWM software and hardware  
 
(1)Connect the M6+ hardware box to the car diagnostic interface via the test line. The red indicator light ① on the host is always on, and the system indicator ② is flashing during startup. After startup, it is always on and beeps once, indicating the startup is finished.
(2)Wired connection: Connect the USB port of the M6+ hardware box to the USB port of the computer or tablet via a USB cable, and a new network connection will appear on the network management interface of the computer or tablet (WIN10 driver-free), and change the network connection attribute IP address to 172.29.127.* 255.255.255.0. Click “Advanced” and add a multi-IP address as 169.254.0.* 255.255.255.0. After the computer or tablet is connected to the network, the indicator light ④ will be always on. Press and hold the switch button ⑥ on the side for 3 seconds and then release it. You can see that the ④ green indicator light is always on and then flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.
(3)The wireless network can NOT be found by plugging in the USB cable. Unplug the USB cable from the M6+ hardware box port, and you will find a M6+ DOIP-**** network on the computer or tablet. You can connect without any settings, and the password is 123456789, ⑤The wireless indicator green light is always on, ④The wired indicator is off. Press and hold the ⑥ switch button on the side for 3 seconds and release it, you can see ⑤the wireless green indicator light is always on and turns to flashing, indicating that the test can be performed normally. It will return to the initial state after it is powered on again.
(4) The computer-side BWM software adopts wired or wireless connection, and the mobile phone BWM APP software adopts wireless connection.
(5) For remote C-end operation, please consult us.

3. For DOIP function and hardware connection of other diagnostic test software, please refer to BWM software and hardware connection method

V2024.3 SSD Software MB Star

1.Latest software version: V2024.3, DELL D630 Format
2.Support Windows 10 system.
3.Available for MB SD C4/C5 on the market.
4.High quality, and SSD Version can run faster than other version.
5. Support HHT-WIN for old card 1989-2000.

Why I should update xentry to new version? 

Because new version xentry Generally support updated new models. And online programming requires the latest version.
V2024.3 MB SD C4 software works with MB SD Connect Compact C4 for the latest MB cars and trucks to 2020. The new generation MB diagnostic equipment Star Diagnosis compact 4 is the latest one on market for all current and new coming MB vehicles.

Having problems to activate software, contact Seven +86 18223445829  to help you by remote assistance. so just rest assured to buy it. 

Please NOTE: So far, MB bus diagnosis & programming can be done via DAS only, NOT Xentry.

Software languages: 

Chinese, English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish & Turkish.

V2024.3 MB SD C4 Software Functions

1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code 
4.erasing trouble code 
5.live-data 
6.adaptation 
7.component testing 
8.maintenance 
9.information consultation 
10.component location diagram 
11.wiring diagram

Testable system:

ENGINE 
AUTO-SPEED 
AIRCONDITIONAL SYSTEM 
SRS 
ABS 
ASR
MPL 
GM 
Bz ORIGINAL ANTI-THEFT 
DASX SYSTEM 
KEYZESS GO SYSTEM 
OBD-II SYSTEM
 
Software includes:

Xentry V2024.3 (win10 X64 version) 
DAS V2024.3: Long registration code, support bus and truck detection, support login-free diagnosis of new models such as 213, 257, etc. Support HHT software diagnosis of old car 140 and other models (no longer need a virtual machine, no computer configuration requirements)
EPC 2018.11: Open data card, you can query the price of accessories in USD and EUR 
WIS 2021.7
SDmedia offline 2014.1
HHT-WIN: Support old cars 1989-2000
Vediamo 5.01.01
Vediamo Database 2019
Star Finder 2016, 2020
PL76 2022.1
DTS version 8.16.15 and 8.14, latest version 2019 data and 2021 data 
DisassembyAssistant
Selit Service Literature Version 1.4
Fix the bug that Mercedes-Benz DAS cannot directly call WIS
Join DAS car smart offline programming
Fix SMART 450, 451, 452, 454 no longer need TAN Caculator, all implemented offline

Support Languages: English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian; Spanish, Swedish, Turkish, Chinese.

Package Includes:

1pc x SUPER MB PRO M6+ Host
1pc x OBD2 16pin Cable 
1pc x USB Cable
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 4PIN Cable
1pc x 512GB SSD 2024.3 M6 Software 

  Email: sales@CarOBDtool.com     
Whatsapp: +8618223445829 
WeChat: seven424424 

Whatsapp Group:

LLnn0gcToGG2UjpHuZmcpG