13th Anni Sale 3 Years Free Update US/UK/EU Ship No Tax 2024 XTOOL D9S PRO All System Diagnostics & Bidirectional, ECU Coding & Programming, Topology, CAN FD & DoIP, 42+ Resets,3-Year Free update PK D9 PRO

Product Description

XTOOL D9S PRO Full System Diagnostic Scanner Online ECU Coding & Programming 

100% Original Xtool Device

Top 13 Reasons to get the Xtool D9S Pro

1. OE-Level Full System Diagnostic with Topplogy Module Mapping
2. 42+ Maintenance Services & Full Special Functions
3. ECU Programming for Benz/BMW/VW/AUDI/SKODA/FORD(off line)/MAZDA(off line)
4. Programmable Module Installation(PMI) function
5. Bi-Directional Control
6. Support CAN FD/DoIP
7. Advanced ECU Coding & Refresh Hidden Functions
8. IMMO/Key Programming
9. BT Connection & Wired Connection via USB Type B cable:
10. 3 Years Software Udpate, Click Diagnosis-updates
11. Support 14+ Languages: English, German, French, Spanish, Finnish, Italian, Japanese, Portuguese, Russian, Korean, Polish, Arabic, Chinese send us the serial number to change the language
12. check the supported car list here. If you are not sure, tell us your vin number and functions you need to check for you. 
13. Check the supported Mileage odometer list here

XTOOL D9S PRO VS XTOOL D9 PRO

• Storage upgrade to 4+128GB,More bigger than D9 PRO
• WIFI Connection,more faster than D9 PRO Bluetooth Version
• 6400mAh Battery,Support Fast Charging!

The VCI communicates with the tablet via WiFi, which means the distance is longer and the connection is more stable.
The most important thing is that it supports DOIP communication.
The tablet has dual wifi, one is used for vci to connect to the tablet, and the other is used for surfing the Internet. They do not overlap.

XTOOL D9S PRO Upgrade version of Xtool D9 Pro, Update the hardware, functions are the same.
 

Model	D9 PRO	D9S PRO
operating system	Android 10	Android 10
processor	Quad core 1.8Ghz	Quad core 1.5Ghz
Memory	2+128G	4+128G
Screen size	9.7 inches (1024*768)	9.7 inches (1024*768)
Operation method	Tablet touch screen	Tablet touch screen
Connection method	Bluetooth/wired connection	WIFI/wired connection
Battery capacity	10000mAh	6400mAh (The capacity becomes smaller, the voltage becomes higher, and it is more durable.)
Charging method	Adapter (two connectors)	USB (three connectors)
Upgrade method	Device connected to WIFI for online upgrade	Device connected to WIFI for online upgrade
Free upgrade time	3 years	3 years
CAN FD	YES	YES
DOIP	YES	YES
USB interface	3.0	3.0
WIFI	2.4G/5G	2.4G/5G
Camera	YES	YES
Used with an Endoscope(optional)	YES	YES
Bracket	YES	YES
Navigation bar below	fixed	flexible

D9S PRO Work with XTOOL Accessories to Further Extend Capabilities:

1. Works with KC501: For Benz infrared key programming, For VW 4th,5th immo, For Eeprom, For Chips programming. Complete advanced-level all-purpose key programming.
2. Works with KS-1:  For Toyota all key lost programming, for 94 chip smart key.
3. Works with M822: For TOYOTA 4A/8A Smart Key Programming.need to work with KC501.
4. Works with M821: For Mercedes-Benz All Key Lost.
5. Works with SK-1: For Toyota/Lexus 8A/4A Smart Key Programming, Add Keys, Emergency start Frequency & Key type reading.
6. Works with KC100: Fullfill general purpose key programming, for VW 4th and 5th immo.
7. Works with XV100: Mainly applied to check unseen parts of the engine, fuel tank, braking system, etc.
8. Works with ADAS: To calibrate the onboard ADAS Systems.

OE-Level Full System Diagnostics:

XTOOL D9S Pro is an OE-level full diagnostic scanner as it can scan ECUs in different types of vehicle systems and subsystems such as engine, TCM(Transmission), SRS(Airbag), ABS, TPMS, BCM, BODY, AC and much more, read /clear codes, view the live data from each available system, perform active tests to check the work status of modules, providing you with a Dealership- Level only diagnosis, getting the accurate and in-depth results across all automotive systems.

Bi-Directional Control/Active Tests+ECU Coding + ECU Programmer：

XTOOL D9S Pro is a bi-directional scan tool with ECU codding ,allows you to receive information to and from the vehicle’s onboard computer and can send commands to the vehicle ECU to perform active tests without using the vehicle's controls, like A/C Clutch on/off, Fuel Injectors, (Cycling) ABS Pump Motor, window, door, sunroof, etc. That’s helpful for DIY mechanics, speeding up the troubleshooting process when it’s time to make repairs.



D9S PRO ECU Programmer

ECU Programming for Benz/BMW/VW/AUDI/SKODA/FORD(off line)/MAZDA(off line)

"Dealership" Level ECU Programming Services to replace the existing software/firmware in the Electronic Control Units (ECU), reprogram New ECUs, Reflash Blank ECU, Replace Old Modules, etc.

Support Newest Doip and with CAN FD Functions

the D9S Pro can works for the Doip protocol and CAN FD .CAN-FD data frame newly adds EDL bit, BRS bit, ESI bit in the control field, and adopts new DLC encoding method and new CRC algorithm (CRC field is extended to 21 bits)

Commonly-Used 42+ Services:

XTOOL D9S Pro With car service tool is designed for mechanics and workshop, garages. Along with the standard service functions like Oil Reset, EPB, SAS Adjustment, DPF Regeneration, Throttle Relearn and Injector Coding, IMMO, ABS Bleeding, TPMS Reset, BMS Reset, etc. Note: Service functions does not work on all vehicles.

Smart AutoVin & Auto Scan+BT Connection+Cable Connection：

XTOOL D9S Pro provides you with more efficient diagnosis work. You just need to plug the VCI into the OBD2 port, within a working range of 33 feet(10 m), you can use the D9S Pro to communicate with the vehicle through BT connection, providing you with higher mobility. Use AutoVin to automatically read the vehicle identification number, or access the OBDII menu to use Auto Scan to perform a comprehensive scan of all available modules to shorten the diagnosis time.

Optimized HIGH-END Hardware Configurations:The screen size of XTOOL D9S Pro (9.7 inches) based on Andoird 9.0 is larger. One screen can display 15 data stream (Graphic and textual), which is easy to navigate.
10000mAh rechargeable battery (up to 20 hours or more of battery life) to avoid frequent charging.
2GB+128GB ROM storage to save more vehicle documents and customer data.
CPU processor updated been 1.8GHz eight-core to perform diagnostics quickly and efficiently.

Special Functions what's D9S Pro including

1.ECU CODING 

ECU coding capability for VW/AUDI/SKODA ONLY which performs online Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.

Flash Hidden Functions(ECU Configuration) for BMW/VW/AUDI/SKODA/TOYOTA/LEXUS/SCION/MAZDA/FORD/LINCOLN, help refresh hidden functions to reprogram adaptive data for certain components after making repairs or replacements. You can activate the higher-level car functions and disable any annoying features. Customize some extra options such as disabled the seat belt buzzer, wind the windows down with the remote fob.

2.All System Bidirectional Scan Tool -XTOOL D9S Pro (Bigger,Bidirectional,Better )

With this diagnostic tool’s Active Test, you can output the command into the ECU in order to turn on/off actuators, to find faults in the subsystems of your car effortlessly, without using the vehicle’s control: Turn on the radiator fan | Modulate the throttle | Open/close windows | Operate mirrors | Turn on/off the lights | Turn on/off the sound horn | Test door lock … （Available test varies by the vehicle manufacturer, year, and model.）

3.Support DoIP protocol

4.Support CAN FD protocol

5.Bluetooth+Cables connections

6. Auto Vin Scan ：Smart AutoVIN technology for fast and precise identifying vehicles in one touch to scan ECUs, acquire vehicle info and run diagnostic on selected systems.Quickly get your car’s information,save your time.

Commonly-Used 42+ Services:

ECU CODING – The Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.

OIL RESET – Reset the oil life systems every time the oil and oil filter are changed;
INJECTOR CODING– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;

Injector Coding - Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed

BRAKE RESET – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;

SAS Calibration – Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.

BATTERY RESET – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;

ABS BLEEDING– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;

ELEC.THROTTLE RLRN – Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;

TPMS RESET – Tire pressure resetting is required to be performed after maintenance is performed;

KEY Programmer – Help ECU to recognize the new keys when you need to add new keys.

DPF REG – Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;

Rain/Light Sensor - After replacing the front gear or replacing the rain/light sensor, you need to use the D9S PRO to re-match and learn the sensor. Also used to test sensors.

EPB Reset: Reset brake pads to maintain the electronic braking system safely and effectively

GEAR LEARN – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.A/C Relearn - operation data of the compressor is reset and self-learning is performed, and the position of the servo motor is reset and self-learning, which is used to detect and verify the fault location of the air conditioning system.

HV Battery - When the new energy vehicle is faulty and repaired, it is necessary to ensure that the high-voltage battery has no power output. Through this function, the power output of the high-voltage battery to the vehicle can be disconnected, so that the maintenance worker can perform maintenance and inspection on the vehicle safely.

Write VIN - The VIN information is stored in some important ECUs of the vehicle. After replacing the ECU, it is necessary to write the VIN number of the vehicle for verification and download the relevant ECU software. (After replacing the second-hand module, you need to flash the VIN)

D9S PRO also support Throttle Relearn, Disable Transportation, Headlight, Air Suspension, EEPROM Adapter, Reset control unit, VGT Relearn, Nox Reset, FRM Reset, EGR Relearn, AdBlue Reset, SRS, Clutch Adaption, Speed Limit, ADAS, etc

Topology Map

XTOOL D9S Pro has Topology Module Mapping design to give you the distinctive diagnostic results:
1) Displays the entire system through the Topology Map to glance all the modules with faults, which is easy to locate faults and causes.
2) Color-coded topology displays all system status in one page
3) View structure of communication between modules

*NOTE: Please be noted that Topology is not universal to all the above vehicle brand models, please send your VIN to us before you place order.




One-Click Generate Health Report: 

Health Report will scan all vehicle modules and give you a status list for each modules condition. Also known as “Global Test” or “Full Scan” .This diagnostic tool can automatically generate a diagnostic report when diagnostic work is successfully finished.The reports are saved to the internal memory for later review. The reports are able to be saved in PDF format, and as the tablet is equipped with WIFI, these can be emailed to the office or directly to the customer.

Online Repair Resources: Provide more than 200000+ vehicle models' service & repair information, handbook, repair case and operation skill

One-Click identify VIN: Smart AutoVIN technology for fast and precise identifying vehicles in one touch to scan ECUs, acquire vehicle info and run diagnostic on selected systems.Quickly get your car’s information,save your time.
Maintenance Help: Including How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.

Extensive Vehicle Coverage - 200000+ Cars supported:

Aisa: Compatible with (JAPAN) Acura, Daihatsu, Honda, Infiniti, Isuzu, Jpisuzu, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR, Scion, Subaru, Subaru, Suzuki, Tlisuzu, (KOREA) Daewoo, Hyundai, KIA, Samsung, Ssangyong; (CHINA) Baic, Beijing, Changan, Changan-Ford, Changcheng, Changhe, Chsuzuki, DF Peugeot, DF Honda, DF Nissan, DF XK, Flyer,BYD, Fukang, Futian,Foton, Geely, Gonow, GZ Honda, Hafei, Haoqing, HC BMW, Hmada, Huachen, Isuzu, JMC, Jacty, Jianghuai, Jiao, Jinlong, Joylong, Lifan, Liuwel-TY, Luxgen, NJ Fiat, Qirul-TY,chery, Qoros, Saicmg, Spark-TY, Trumpchi GAC, Weili, Xiaokang Dongfeng, Xili,Faw Tianjin, Xinkai, YQ Mazda, Zhongshun, Zhongtai, Zotye, Zhongxing (MALAYSIA) Perodua, Proton, (IRAN)MVM

Europe: Compatible with Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR

USA: Compatible with Gm, USAFord, Chrysler, Willy; Australia: Compatible with Austford, Holden; Brazil: Compatible with BXFiat, BXGM


 

XTOOL D7 vs XTOOL D7s vs XTOOL D8 vs XTOOL D8 BT vs XTOOL D9 vs XTOOL D9 Pro

Item	XTOOL D7	Xtool D7S	XTOOL D8	XTOOL D9	XTOOL D9 Pro
Connection Method	Cable Connection	Cable Connection	Cable Connection	BT Connection/USB Cable	BT Connection/USB Cable
CAN FD/DoIP	N/A	CAN FD & DoIP	CAN FD	CAN FD & DoIP	CAN FD & DoIP
Battery Capacity	4000 mAh	5000 mAh	10,000 mAh	10,000 mAh	10,000 mAh
Storage	1G+32G	2G+64G	2G+64G	2G+128G	2G+128G
Display	7" Display	7" Display	8" Display	9.7" Display	9.7" Display
OS	Android 10	Android 10	Android 5.1.1	Android 10	Android 10
All Systems Diagnostics, Full Bi-Directional Control	✓	✓	✓	✓	✓
Services	36+	36+	38+	42+	42+
Advanced Special Functions	Idle Relearn, Fuel Trim Reset, Alcohol Content Reset, VIN Relearn, CAM Crank Relearn, Crankshaft Relearn, SWS Calibration, Yaw Rate Sensor Calibration, HVAC Calibration, Pilot Quantity Learning, Transmission Oil Counter Reset etc	Idle Relearn, Fuel Trim Reset, Alcohol Content Reset, VIN Relearn, CAM Crank Relearn, Crankshaft Relearn, SWS Calibration, Yaw Rate Sensor Calibration, HVAC Calibration, Pilot Quantity Learning, Transmission Oil Counter Reset etc	Idle Relearn, Fuel Trim Reset, Alcohol Content Reset, VIN Relearn, CAM Crank Relearn, Crankshaft Relearn, SWS Calibration, Yaw Rate Sensor Calibration, HVAC Calibration, Pilot Quantity Learning, Transmission Oil Counter Reset, ADAS Calibration, etc	Idle Relearn, Fuel Trim Reset, Alcohol Content Reset, VIN Relearn, CAM Crank Relearn, Crankshaft Relearn, SWS Calibration, Yaw Rate Sensor Calibration, HVAC Calibration, Pilot Quantity Learning, Transmission Oil Counter Reset, ADAS Calibration, etc	Idle Relearn, Fuel Trim Reset, Alcohol Content Reset, VIN Relearn, CAM Crank Relearn, Crankshaft Relearn, SWS Calibration, Yaw Rate Sensor Calibration, HVAC Calibration, Pilot Quantity Learning, Transmission Oil Counter Reset, ADAS Calibration, etc
Flash Hidden Functions/ECU Coding/ECU Programming	ECU Coding for VW, Audi, Skoda	ECU Coding for VW, Audi, Skoda	Flash Hidden Functions, ECU Coding for VW, Audi, Skoda	Flash Hidden Functions, ECU Coding for VW, Audi, Skoda	Flash Hidden Functions, ECU Coding for VW, Audi, Skoda, ECU Programming for BMW, Benz, VW
Topology Map	N/A	N/A	✓	✓	✓
Free Software Updates	3 Years	3 Years	3 Years	3 Years	3 Years
Work with KC100/KC501	N	Y	Y	Y	Y

 

The difference between the D9 and the D9 Pro is:

• D9 Pro supports ECU CODING for BMW / VW / AUDI / Škoda / BENZ…. The D9 only supports the VW / AUDI / Škoda.
• D9 Pro supports ECU PROGRAMMING for BMW/ VW / AUDI / Škoda / BENZ / FORD (Offline) / MAZDA (Offline)…. the D9 does not.
• The update fee for the D9 is $258, and the update fee for the D9 Pro is $358 after the 3 years of free updates.

Xtool D9S PRO Parameters

Operating System：Android 10.0
Processor：Quad-core processor 1.8GHz
Ram：4G
Rom：128G
Display：9.7-inch capacitive, 1024×768 resolution
Connectivity：USB/Wi-Fi/Bluetooth
Camera：8-megapixel autofocus rear camera with flash
Sensor：Gravity sensor
Audio Input/ Audio Output：Microphone / Loudspeaker
Ports：USB3.0/DC charging port/VGA port DOIP port
Battery：3.7V, 6400mAh, Rechargeable Lithium-ion Battery
Input Voltage：12V DC
Operating Temperature：-10~50℃
Relative Humidity：< 90%
Dimensions：315.07×218.35×34.61 mm

Xtool D9S PRO Package Includes:

1pc x XTOOL D9S Pro tablet
1pc x VCI Box
1pc x For KIA-20 adapter
1pc x For Toyota-17 adapter
1pc x For GM/DAEWOO-12 adapter
1pc x For Honda-3 adapter 
1pc x For Suzuki-3 adapter
1pc x For Hyundai/Kia-10 adapter 
1pc x For Fiat-3 adapter
1pc x For Nissan-14 adapter
1pc x For Mazda-17 adapter
1pc x For OBD2-16 adapter
1pc x For BMW-20 adapter
1pc x For Benz-38 cable
1pc x For Mitsubishi-12+16 cable
1pc x For Benz-14 cable
1pc x Main cable
1pc x For Universal -3 cable
1pc x For Citroen-2 cable
1pc x For Audi-4 cable 
1pc x For Audi-4 clip cable
1pc x Cigarette lighter
1pc x Power adapter
1pc x USB cable
1pc x Type-C cable
1pc x US power cord
1pc x EU power cord
1pc x Manual


Email: sales@CarOBDtool.com     
Whatsapp: +8618223445829 
WeChat: seven424424 

Whatsapp Group:

LLnn0gcToGG2UjpHuZmcpG